RIDE Server Configuration is extracted from that of Codenvy on top of which RIDE Server is built.

Configuration is handled by modifying codenvy.env placed in the host folder volume mounted to :/data. This configuration file is generated during the  rbrain/rideserver init phase. If you rerun  rbrain/rideserver-cli init in an already initialized folder, the process will abort unless you pass --force, --pull, or --reinit.

Each variable is documented with an explanation and usually commented out. If you need to set a variable, uncomment it and configure it with your value. You can then run rbrain/rideserver-cli config to apply this configuration to your system. rbrain/rideserver-cli start also reapplies the latest configuration.

You can run rbrain/rideserver-cli init to install a new configuration into an empty directory. This command uses the rideserver-cli/init:<version> Docker container to deliver a version-specific set of puppet templates into the folder.

If you run rbrain/rideserver-cli config RIDE Server runs puppet to transform your puppet templates into a RIDE Server instance configuration, placing the results into /codenvy/instance if you volume mounted that, or into a instance subdirectory of the path you mounted to /codenvy.  Each time you start RIDE Server rbrain/rideserver-cli config is run to ensure instance configuration files are properly generated and consistent with the configuration you have specified in codenvy.env.

OAuth Account Creation

By default RIDE Server users should be added by Admin. However, by setting CODENVY_USER_SELF_CREATION_ALLOWED=true  in side codenv.envy users can create accounts in the system by:

  • Self-registering using an email and username (SMTP server should be set as well)
  • Using oAuth from Google, GitHub, Microsoft or LinkedIn

Optionally you can connect RIDE Server to LDAP which will disable self-registration (see the LDAP section) or you can add your own oAuth provider for user account creation by following the steps below.

If you have a custom DNS, you need to register a GitHub oAuth application with GitHub’s oAuth registration service. You will be asked for the callback URL, which is http://<your_hostname>/api/oauth/callback. You will receive from GitHub a client ID and secret, which must be added to codenvy.env:


Google oAuth (and others) are configured in the same way:



By default RIDE Server runs over HTTP as this is simplest to install. There are two requirements for configuring HTTP/S:

  1. You must bind RIDE Server to a valid DNS name. The HTTP mode of RIDE Server allows us to operate over IP addresses. HTTP/S requires certificates that are bound to a DNS entries that you purchase from a DNS provider.
  2. A valid SSL certificate issued by a trusted issuer. This would normally be a .pem file with certificate, key and intermediate certificates. Please avoid using free certificate issuers as their limitations cause issues with JVMs.

To configure HTTP/S, in codenvy.env:


Workspace Limits

You can place limits on how users interact with the system to control overall system resource usage. You can define how many workspaces created, RAM consumed, idle timeout, and a variety of other parameters. See “Workspace Limits” in codenvy.env.

You can also set limits on Docker’s allocation of CPU to workspaces, which may be necessary if you have a very dense workspace population where users are competing for limited physical resources.

Workspaces Count

The maximum number of workspaces that a user is allowed to create. This limit is set by the CODENVY_LIMITS_USER_WORKSPACES_COUNTproperty in the codenvy.env file with a default value of 30. The user will be presented with an error message if they try to create additional workspaces. This applies to the total number of both running and stopped workspaces. Since each workspace is saved as a snapshot, placing a cap on this number is a way to limit the disk consumption for workspace storage.

Running Workspaces Count

The maximum number of running workspaces that a single user is allowed to have. This limit is set by the CODENVY_LIMITS_USER_WORKSPACES_RUN_COUNT property in the codenvy.env file with a default value of 10. If the user has reached this threshold and they try to start an additional workspace, they will be prompted with an error message. The user will need to stop a running workspace to activate another.

Workspaces RAM

The total amount of RAM that a single user is allowed to allocate to running workspaces. This limit is set by the CODENVY_LIMITS_USER_WORKSPACES_RAM property in the codenvy.env file with a default value of 100gb. A user can allocate this RAM to a single workspace or spread it across multiple workspaces.

Workspace Environment

The maximum amount of RAM that a user can allocate to a workspace when they create a new workspace. This limit is set by the CODENVY_LIMITS_WORKSPACE_ENV_RAM property in the codenvy.env file with a default value of 16gb. The RAM slider is adjusted to this maximum value.

Idle Timeout

Workspaces have idle timeouts that stop workspaces that a user has not interacted with in a specified time. The idle timeout is set by the CODENVY_MACHINE_WS_AGENT_INACTIVE_STOP_TIMEOUT_MS property in the codenvy.env file with a default value of 14400000milliseconds or 4 hours. This allows RIDE Server to to free up unused resources but may need to be increased if longer running workspaces are required.


Workspace runtimes are powered by one or more Docker containers. When a user creates a workspace, they do so from a stack which includes a Dockerfile or reference to a Docker image which will be used to create the containers for the workspace runtimes. Stacks can pull that image from a public registry, like DockerHub, or a private registry. Images in a registry can be publicly visible or private, which require user credentials to access. You can also set up a private registry to act as a mirror to Docker Hub. And, if you are running RIDE Server behind a proxy, you can configure the Docker daemon registry to operate behind a proxy.

Private Images

When users create a workspace, they must select a Docker image (stack) to power the workspace. We provide ready-to-go stacks which reference images hosted at the public Docker Hub, which do not require any authenticated access to pull. You can provide your own images that are stored in a local private registry or at Docker Hub. The images may be publicly or privately visible, even if they are part of a private registry.

If your stack images that RIDE Server wants to pull require authenticated access to any registry, or if you want RIDE Server to push snapshot images into a registry (also requiring authenticated access), then you must configure registry authentication.

In codenvy.env:



There are different configurations for AWS EC2 and the Docker regsitry. You can define as many different registries as you’d like, using the numerical indicator in the environment variable. In case of adding several registries just copy set of properties and append REGISTRY[n] for each variable.

Pulling Private Images In Stacks

Once you have configured private registry access, any stack that has a FROM <registry>/<repository> that requires authenticated access will use the provided credentials within codenvy.env to access the registry.

# Syntax
FROM <repository>/<image>:<tag>

# Example:
FROM my.registry.url:9000/image:latest

Using Snapshots With Private Registries

You can configure RIDE Server to save your workspace snapshots to a private registry that you have installed, such as JFrog’s Artifactory or Docker’s Enterprise Registry. The default configuration of workspace snapshots is to have them saved within a private Docker registry that we start when you start RIDE Server.

Save Workspace Snapshots To A Custom Private Registry

In codenvy.env:


Custom Dockerfiles And Composefiles For Workspaces

Your workspaces are powered by a set of runtime environments. The default runtime is Docker. Typically, admins have pre-built images in DockerHub or another registry which are pulled when the workspace is created. You can optionally provide custom Dockerfiles (or let your users provide their own Dockerfiles), which will dynamically create a workspace image when a user creates a new workspace.

To use your custom Dockerfiles, you can:

  1. Create a custom stack which includes a recipe with your Dockerfile.
  2. Or, users can create a custom recipe when creating a workspace that references your registry.

Privileged Mode

Docker’s privileged mode allows a container to have root-level access to the host from within the container. This enables containers to do more than they normally would, but opens up security risks. You can enable your workspaces to have privileged mode, giving your users root-level access to the host where RIDE Server is running (in addition to root access of their workspace). Privileged mode is necessary if you want to enable certain features such as Docker in Docker.

By default, workspaces are not configured with Docker privileged mode. There are many security risks to activating this feature - please review the various issues with blogs posted online. In codenvy.env:


Mirroring Docker Hub

If you are running a private registry internally to your company, you can optionally mirror Docker Hub. Your private registry will download and cache any images that your users reference from the public Docker Hub. You need to configure your Docker daemon to make use of mirroring.

Using Docker In Workspaces

If you’d like your users to work with projects which have their own Docker images and Docker build capabilities inside of their workspace, then you need to configure the workspace to work with Docker. You have three options:

  1. Activate Docker’s privileged mode, where your user workspaces have access to the host:
# Update your codenvy.env to allow all RIDE Server workspaces machines/containers privileged rights:CHE_DOCKER_PRIVILEGED=true;

2. Configure RIDE Server’s workspaces to volume mount the host docker daemon socket file. 

# Update your codenvy.env to allow all RIDE Server workspaces to volume mount their host Daemon when starting:

  1. Configure Docker daemon to listen to tcp socket and specify DOCKER_HOST environment variable in workspace machine. Each host environment will have different network topology/configuration so below is only to be used as general example. Configure your Docker daemon to listen on TCP. First, add the following to your Docker configuration file (on Ubuntu it’s /etc/default/docker - see the Docker docs for the location for your OS):

Second, export DOCKER_HOST variable in your workspace. You can do this in the terminal or make it permanent by adding ENV DOCKER_HOST=tcp://$IP:2375 to a workspace recipe, where $IP is your docker daemon machine IP.

# Listen using the default unix socket, and on specific IP address on host.

# This will vary greatly depending on your host OS.
sudo dockerd -H unix:///var/run/docker.sock -H tcp://
# Verify that the Docker API is responding at: http://$IP:2375/containers/json

# In workspace machine
docker -H tcp://$IP:2375 ps

# Shorter form
export DOCKER_HOST="tcp://$IP:2375"
docker ps

These three tactics will allow user workspaces to perform docker commands from within their workspace to create and work with Docker containers that will be outside the workspace. In other words, this makes your user’s workspace feel like their laptop where they would normally be performing docker build and docker run commands.

You will need to make sure that your user’s workspaces are powered from a stack that has Docker installed inside of it. RIDE Server’s default Docker recipe images do not have Docker installed.


RIDE Server embeds a dummy mail server which is used only for sending out confirmation emails in the event that the system allows users to self-register. Most enterprises prefer to integrate RIDE Server with their LDAP or oAuth server.

If you choose to allow self-service registration then we suggest you use your own SMTP server. Modify codenvy.env (below is an example for Gmail):


If you want to use your Gmail as RIDE Server mail server, make sure your account is configured to allow less secure apps.

Also it is possible to customize email notifications subjects. To achieve this just set following properties in codenvy.env file with desired values (here defaults is set):

Did this answer your question?